As I walked out of the foodstore after grabbing lunch, I was reminded of why it is so important to have solid job descriptions for heavy equipment operators. I watched the operator of this piece of equipment hop out to shovel snow into the scoop because the plows had piled the snow in a location that was inaccessible to the heavier equipment.
I can’t even count the times that I have listened to a heavy equipment operator say during an FCE that they don’t need to be there for physical testing because all they do is sit and operate a piece of equipment. Many times, this was a tricky situation because the employer did not have a job description that had more than a couple of bullet points, typically noting requirements to be certified to operate certain types of equipment. This can sometimes take the return to work decision from the physicians and rehab professionals and place it in the hands of the lawyers to argue over what tasks are actually performed by the employee.
The Dictionary of Occupational Titles entries don’t often offer much help for equipment operator positions as they include information about tasks the equipment might be used to complete but they don’t provide a clear picture of the entirety of the position. Over the years, I have been out in the field with equipment operators who operated all manner of heavy equipment and were also responsible for other tasks during the course of their shift. These tasks included manual digging with shovels (or even shoveling snow into the loader), carrying equipment, lifting and carrying debris to a loader bucket for removal, adding or removing different attachments to the heavy equipment and more.
In addition to the physical tasks, I have been in locations that have required heavy equipment operators to walk across wet and/or uneven terrain just to get to their equipment. As I write this post, people are still digging out from Winter Storm Orlena which dumped anywhere between 15 and 30 inches of snow across the northeast. Many equipment operators have had to walk across slippery parking lots, covered in ice and snow, to get to their assigned loaders. On large construction sites, while the site is still being graded and excavated in preparation for construction, operators often walk across muddy, uneven areas. This mud can cake up in the steps on the side of the equipment making that 20 inch first step into a 23 inch first step as well as making things a little more slippery for climbing on/off of equipment.
While I have been on job sites in which the heavy equipment operators are solely operators – typically on sites where multiple unions are working together – the majority of sites have had heavy equipment operators that fill multiple roles or maybe assigned tasks other than operating equipment.
Take a minute to check your job descriptions.
- Do they include information on getting to and from equipment? (Where might they be walking?)
- Do they include step up height for the different pieces of equipment that are operated?
- Do they include the additional roles and responsibilities of the operator? Do they help with manual digging with a shovel? Do they have to pick up materials for loading that may not be able to be accessed by the equipment?
If you are wondering whether your job descriptions provide enough information about the essential minimum postural and physical demands as well as describe the essential tasks in a way that explains them to the treating physician or therapist, give us a call at 732-796-7370 or e-mail me at firstname.lastname@example.org.